1. Preparing the Surface Correctly
The first thing you need for a good installation is a strong base. The surface that will hold the marble must be:
Flat and Level: Tiles that are not level will have lippage, which is when the height of the tiles is different.
Clean and Dry: Dust, grease, or old glue can make bonds weaker.
Stable: The base needs to be strong enough to hold the weight of the marble.
One of the most common reasons why marble installations fail too soon is that this step is skipped.
2. Choosing the Right Adhesive
Not every glue works well with marble. Using the wrong product can lead to stains, weak adhesion, or weak structures. The quality standard says:
Use white thin-set mortar or epoxy to stick marble tiles and slabs together.
Back-Butter Technique for big slabs: put glue on both the front and back of the marble to make sure they touch all the way around.
Professional jasa pasang marmer always use adhesives that are made just for natural stone.
3. Cutting and aligning with precision
Using wet saws and diamond blades, you need to cut marble very carefully. Cuts that are rough or uneven weaken the structure and look. Standards for alignment include:
Joints that are always the same and have the same amount of space for grout.
Continuous Vein Flow where marble patterns fit together naturally.
Tight tolerances with few visible gaps.
4. Control of Lippage and Leveling
After polishing, you can see even a small difference in height between tiles. Installers often check to make sure they meet quality standards:
Use spirit or laser levels to check how flat the tile is.
Minimal lippage that meets international tiling standards, which is usually less than 1.5 mm.
5. Finishing and Grouting
Grout isn’t just for looks; it also protects the joints. The rules say:
Choosing the right grout color that goes with or matches the marble.
No voids or pinholes in the application.
Cleaning right away will keep grout haze from forming on marble surfaces.
6. Protection and sealing
Sealing is necessary because marble is porous. A good sealer keeps stains and moisture out. Contractors should:
Put on Sealer After installation and before use, evenly.
Teach clients about resealing schedules, which should happen every one to two years, depending on how much the item is used.
Homeowners often hire jasa poles marmer to polish and reseal marble every so often to keep it looking good for a long time.
7. Standards for polishing
Polishing makes marble’s natural shine stand out. Polishing of high quality includes:
Diamond pads and professional machines are used to get a mirror-like finish.
No uneven shine; the surface should be shiny all over.
Finish that is scratch-free and has no visible swirl marks.
That’s why people often call professional jasa poles marmer after they are put up to make the surface perfect.
8. Last Check
A marble installation of high quality must pass a final quality check, which includes:
Aligning veins and joints.
The surface has a consistent shine.
No cracks, chips, or stains.
The project is only finished after these checks have been done.